I am still busy because I haven't succeed yet!

“I am still busy because I haven't succeed yet!” Do you believe that this words are come out from our General Manager Kenny who now owns a factory and hundreds of millions' property?

Our company continue to export engine tools for abroad many years. Through this year, we met many frustrations but we adhered to.

Today, we still busy because we haven’t succeed yet! We will research higher quality oil filter wrenches for you.

8 Precautions of wheel balance weight plier

Weeel balance weight plier is one of tire repair tools, I will tell you 8 precautions of it.

1. Keep work area clean.

2. Do not rain, excessive moisture or flammable liquids and gases places.

3. Power cord away from heat, oil and sharp objects, the power cord is damaged must be promptly replaced, do not touch with bare conductors to prevent electric shock.

4. tool when not in use and stored in a dry place out of reach of children.

5. Do not exceed the tool's ability to work to use, do not use small power tools to do a large work load to avoid damage.

6. Do not use this tool to do work beyond their capabilities.

7. work wear overalls and wearing protective glasses.

8. tool when not unplug the power cord to prevent accidental activation dangerous.

If you want to learn more about tire repair tools, please contact us!

Transmission Air Jack

Today, I will introduce a hydraulic tools for you.

This heavy duty 3 ton jack gets vehicles almost two feet off the ground. Extra-low profile reaches under most show cars. Dual piston Rapid Pump technology lifts most work loads in just 3-1/2 pumps.

• Super-tough precision welded construction with an industrial grade finish
• Industrial quality for professional mechanics and hardcore automotive enthusiasts
• Rapid Pump® exclusive dual parallel pump system lifts with far fewer pumps
• Extra-low profile reach and high lift makes it the most versatile floor jack in the marketplace
• Universal joint release provides precise load control in any handle position
• Two piece knurled steel handle for a sure grip, equipped with foam bumper to prevent damage to vehicle finish
• Extra-wide steel casters for stability

Learn more at www.autotoolsdepot.com.

About Tire Changer Tools

Tires changer tools in the comfort of your own garage with this portable tire changer! This manual tire changer requires no expensive 240V power hookups or pneumatic lines to operate and is suitable for all tires from 8 in. to light truck tires. The tire changer features all-steel construction for durability.

· Handles all tires from 8 in. to light truck, including flotation tires

· All steel construction

· Predrilled base for secure installation

· Specially designed to protect inner tubes

· Works with Motorcycle Tire Changer Attachment Item 60810 to service motorcycle tires from 11 in. to 25 in. diameter

Learn more at www.autotoolsdepot.com.

Do you know the oil filter wrench?

An oil filter wrench is a tool for removing spin-on type oil filters. These filters are smooth, cylindrical canisters with knurling on the bottom that are difficult to grip, especially when they are oily.

One common type of wrench is shown on the right. The loop of chain is placed around the filter, and the bar is turned anticlockwise by hand until the chain wraps itself tightly around the filter. A socket wrench or adjustable spanner is then used to turn the hexagonal bar further in the same direction. This increases the tension in the chain, which bites into the soft metal casing of the oil filter which helps prevent slippage.

Another type uses a metal band that is attached at both ends to a handle. The looped band is placed around the filter and the handle is turned anticlockwise, which puts tension on the band, causing it to grip the filter.

A third common type of wrench utilizes a metal or plastic cup that is shaped much like a socket. The cup is placed on the end of the filter, which engages the knurling. A socket or wrench is then used to loosen the filter. Volkswagen Group and BMW cars require this type of wrench to remove their filters (or the lid of the filter housing, where a non-cartridge filter is used).

How clean the engine compartment?

1. Cleaning the engine compartment debris manually

Before the official clean-up, we need the engine compartment of leaves and other debris cleared.

2. Idle completely shut down for about 5 minutes after

The reason sure the car idling for 5 minutes, because after the engine idle for some time, the car will make the engine oil temperature becomes soft, thus easier to clean. But also there is a flaw, that is after the car the temperature rises, the owner at the time of cleaning can easily be burned.

3. The cleaning agent is sprayed onto the surface of the engine

Since the engine in use for some time, there is usually grease clung to it, at the time of cleaning generally requires the use of special cleaning agents. Therefore, this step is to spray the cleaning agent to the surface of the engine.

4. Sponge

After spraying the engine cleaner, car owners will use a sponge to scrub the entire engine compartment.

5. Rinse with water cannons

The final step is the use of engine washing gun to clean the engine compartment of the car. Of course, if you still worried about a short circuit in the engine compartment of electronic devices, you can use wet towel or a dry towel.

5 notes you need know when install valve

You know our company is an auto tools manufacturer, we can provide high qualty tools to meet your demand. Today, I tell you 5 notes you need know when install valve.

1. Hand wheels, handle and drive mechanism for lifting are not allowed to use, and forbid the collision.

2. Gate Valve should be mounted vertically.

3. With a bypass valve to open the bypass valve opening should be preceded.

4. With the valve drive mechanism, install the required product specification.

5. If the valve switch is used frequently lubrication at least once a month.