An introduce of Tire Changer Tools

Tires changer tools in the comfort of your own garage with this portable tire changer! This manual tire changer requires no expensive 240V power hookups or pneumatic lines to operate and is suitable for all tires from 8 in. to light truck tires. The tire changer features all-steel construction for durability.

· Handles all tires from 8 in. to light truck, including flotation tires

· All steel construction

· Predrilled base for secure installation

· Specially designed to protect inner tubes

· Works with Motorcycle Tire Changer Attachment Item 60810 to service motorcycle tires from 11 in. to 25 in. diameter

Learn more Tires changer tools at www.autotoolsdepot.com.

Magnetic Tray you need know

Magnetic Tray system as follows:

1: Role: reflow carrier board used.

2: Scope: This system has focused on a flexible board (FCB), sheet, shed plate, aluminum plate, irregular shape contained in the printing plate red plastic, solder paste printing, SMT placement, reflow process of panels, multi-board production and even increase productivity.

3: made with materials: aluminum plate, steel and high-temperature magnets.

4: Advantages: no-clean, easy operation and long life, good flatness, high temperature stability.

5: The new magnetic reflow tray with vintage contrast silica gel plate

● Stability: Magnetic reflow tray in steel magnetic state of the FPC flattened, physical process, magnetic can increase or decrease according to the requirements, will not change due to factors such as temperature and time, more stable. Silica gel plate by chemical action, will change at a temperature of Time and other conditions, lack of stability. In particular, after a certain time tackiness decrease, and when the viscosity decreased during use of uncleaned. When the FPC reflow causing deformation of the substrate. Affect the quality of welding.

● life: magnetic material used reflow tray, works as a physical process, both high temperature materials, as long as not permanently damage and accident conditions can be used. Silica gel plate during use, the use of chemical processes, silicone materials in the course of aging, the cost is very high.

● Quality: Magnetic reflow tray will not damage when taking FPC board. Silica gel plate during use in order to ensure the smooth FPC has a certain viscosity, but in taking board will take the stick FPC cause difficulties and FPC board deformation

● Cost: Magnetic reflow tray, easy to use and reduce front-line staff, and posterior segment tear tape personnel, while reducing the amount of high-temperature adhesive tape. Price, although more expensive than silica gel plates, but for mass production, the cost of a strong competitive advantage.

About testing your car battery you need know

We are battery tester manufacturer, I want to tell you how to test your car battery.

Car Battery Testing & Voltage

It's important to test your battery and electrical system regularly, not just when it's starting to show signs of weakness. Proactively testing it (or making sure your mechanic does) twice a year will help reduce your chances of failure. Most retailers offer a simple free five minute battery test. Use our Find a Retailer for a location near you to get a free battery test.

When Fully Charged, How Many Volts Should A Car Battery Have?

Fully charged automotive batteries should measure at 12.6 volts or above. When the engine is running, this measurement should be 13.7 to 14.7 volts. If you don’t have a multimeter to tell you the voltage of your battery, you can do a test of your electrical system by starting the car and turning on the headlights. If they are dim, that indicates the lights are running off the battery and that little or no charge is being produced by the alternator. If the lights get brighter as you rev the engine, it means the alternator is producing some current, but may not be producing enough at idle to keep the battery properly charged. If the lights have normal brightness and don't change intensity as the engine is revved, your charging system is probably functioning normally. If you’ve been experiencing problems with your battery system and the headlight test checks out okay, you should check whether or not the battery is holding a charge, or if something on the vehicle is discharging it.

How Do You Perform A Load Test?

To pass a load test, the battery must maintain 9.6 volts at 15 seconds when tested at one-half the CCA rating and 70°F (or above). This test must be done with a true load (carbon pile) and not one of the hand-held testers that work off a conductance algorithm. The test must be run with the battery in a high state of charge. Be sure to read and follow all safety and handling instructions on the battery, this website and your battery tester. If you would like your battery tested, use our Find a Retailer for a location near you.

We provide high quality battery tester.

How much do you know about magnetic pickup tool?

When most people think of using a magnetic pickup tool they think of the most basic uses: picking up nails and screws that they have dropped on the floor while working on a project, finding lost nails and screws in piles of sawdust, or ones that are dropped while working outside in the snow, and of course picking up your yard when the roofing company leaves behind a mess of nails in your grass.

While these are all great uses of the tool, they are not the only way to put this tool to use. As a magnetic tools manufacturer, we can provide varies of magnetic pickup tools.