Why air tool motors need lubrication?

We are lubrication tools manufacturer in China, here we want to introduce the reason of air tool motors need lubrication.

Most air tool motors have a gap (or clearance) between the air rotor and the motor itself. Therefore lubrication will not only reduce friction it prevents water condensation and air loss.

Lubricate the mechanism on both ends of the tool internally and externally.

Many air tools have grease fittings. Look for them on yours and check the manual if you’re unsure if yours has one (or possibly more).

Different oils and lubricants are recommended by the manufacturer’s sometimes depending on if the case is metallic (Aluminum) or composite (similar to hard plastic). When in doubt check the manual out.

If an air tool seems to be weak, the easiest thing to try is proper lubrication. You may be surprised. Proper oiling can fill the spaces between the rotors and housing restoring internal pressure and power.

Make sure hoses are kept off the the shop floor by using a convenient time saving hose reel.

Invest in air line products that help prevent air from reaching valuable air tools like an air line desiccant dryer.

We provide lubrication tools for many years.

How to plug a tire in a road side emergency?

This first picture is of the plugging kit that I keep with me at all times…

First, you must keep tire repair tools with you at all times.

  

This picture is of the screw (or nail,or bolt,or screwdriver ETC.) removed and the remaining hole being prepared for the plug. This tool is the reamer and its use is twofold. One,is to make sure that the hole is large enough to accept the next tool you will be inserting,and two,is to rough up the internal sides of the hole to make sure that the rubber cement has the best chance to adhere to the holes surface area.

Ok,we’ve reamed out the hole good and now we get a plug,the cement,the insertion tool and assemble it like this…

If you need tire repair tools, you can contact us via info@autotoolsdepot.com.

Tell you some home automotive electrical testing tools(2)

We all know that have the right auto detailing tools to help you find the problem can be critical to get the job done.

Keep in mind every mechanic will have their own style and method when it come to finding a problem.

Here I will introduce a kind of light tester to you.

2… 12 Volt Light tester

A 12 volt light tester often called a idiot light is used by many mechanics’s as their main electrical tool.

Since a vehicles electrical system uses 12 volts finding if a wire has voltage is easy with a idiot light. One side is grounded to a negative source and the tip can than probe wires to see if voltage is present.

This makes them a handy cheap quick tool to find if their is voltage on a wire when there should be or hooking up trailer lights.

Tell you some home automotive electrical testing tools(1)

Troubleshooting electrical on any vehicle can be simple but often can become complex.

Having the right auto detailing tools to help you find the problem can be critical to get the job done.

Keep in mind every mechanic will have their own style and method when it come to finding a problem.

Some will use the simplest of tools while other will use more expensive diagnostic equipment.

The main goal always is to get the job done and fixed so using whatever auto tools  you feel best using is the way to go.

1. Multi Meter

A multi meter can do most all of your eclectic troubleshooting needs from testing voltages to continuity.

A expensive meter is not needed and most any cheap low cost unit will work.

Of course if you already have a nice meter than all the better but for working on cars and trucks most any meter will be fine.

We will introduce others in next news.

Do know more about lubrication tools?

About lubrication tools, I want to tell you some about it. One coolant choice that many fabricators overlook is Minimum Quantity Lubrication (MQL).

Lower long-term costs. Although MQL fluids typically cost substantially more per gallon, less than 1/10,000 of the amount of fluid is used. It also eliminates the need to invest in reclamation equipment such as sumps, recyclers, containers, pumps, or filtration devices.

Less waste. Another major benefit is that MQL is a much more sustainable option. As this article from Fabricating & Metalworking discusses, metal chips produced during MQL machining are much cleaner than conventional approaches. Near-dry chips are easier to recycle and more valuable as a recycled material. Conversely, “wet” processes like flood coolants produce “increased and on-going lifecycle costs in the form of energy consumption, chemical maintenance, water make-up, disposal of used cutting fluids, and then starting the cycle of waste/recovery all over again by replenishing consumed fluids,” the article states.

Less maintenance. The smaller amount of coolant means that less fluid sticks to the part. This reduces the need to clean parts after cutting. Also, MQL fluids do not have to be diluted with water. Flood coolants, however, have to be mixed with water, and operators need to monitor the concentration as fluid is lost, water evaporates, etc.

Managers need to be aware, however, that MQL application is a more sensitive process than flood cooling. Mist must be aimed precisely at the tool to be effective. Fluid selection, equipment, and material type also play key roles in proper MQL application. For a full description of what is needed to use MQL, including equipment and fluid types, download The MQL Handbook. This helpful resource also offers some “rules of thumb” and other important tips to consider before transitioning to MQL.

If you want to buy lubrication tools such as grease guns, you can contact us via info@autotoolsdepot.com.

What a role does a electrical testing tool play?

Testing is an important part of the design and production process for any electromechanical device. In addition to understanding the basics of electrical testing tools, these devices need to be tested to ensure that electricity is flowing where it should be, and is not where it shouldn’t. With electrical design, designers need to be worried about safety of the user because the voltages and currents can be very high. With electronics, one is really just worried about the safety of the circuitry. The voltages typically aren't high enough to be dangerous. Thankfully, it’s fairly simple to test circuitry if you’re equipped with a little know-how and the right tools. Read on to learn simple ways to conduct electrical testing, and to incorporate this into the overall production process.

Basic testing procedures typically involve anything you can do with a digital multimeter, such as:

- measure voltage

- measure current

- measure resistance

- measure capacitance

- check continuity

Multimeters are typically your first stop on the troubleshooting train. They are useful to diagnose circuitry and to gather simple information like the characteristics mentioned above. Thankfully, they are easy to find, and reasonably cheap. Some other useful tools for basic testing are those that enable you to check power supply (older models are analog; new ones are digital) - these allow you to set a specific voltage and/or current value and operate your circuit at those levels. An outlet monitor is also a good tool to have. They plug into the wall and then you plug your device into it. The monitor will tell you what voltage, current, wattage, etc. you are operating at. This information is good for determining how much it will cost you to operate a given device.

How much you learn auto detailing tools?

There are many vehicles in the street and everyone hardly have a car. However do you know the auto detailing tools? Here I will introduce a gun to you.

The best car wash foam gun spray for washing cars, the gilmour gun spraying on the market proposed are compressed air gun for cleaning the car interior is distinguished by the flexible plastic tube rotating inside the cone aluminum. The regulator, which allows to dose the car soap in an optimal way. The entrance is inclined at 45 ° to facilitate use. V-shape spray Classic is equipped with a Car Soap and Shampoo tank and anti fall plate which serves to stabilize it precisely avoiding accidental falls.

This is the car foam gun before and after use the good metal is the evolution of the model "Classic" always represented by a compressed wash foam gun, but which is characterized by the greater resistance of the tube rotating in aluminum and plastic that ensures an air jet more full and requires less maintenance than model Classic.

We provide varies of Foam Guns many years, if you need, please contact us via info@autotoolsdepot.com.