Ball joint separator service

The “scissors” or “pivot jaw” type ball joint separator features two forged halves that share a common pivot point. A cupped-out seat engages on the opposite side of the joint from the stud and the driver side of the tool jaw engages the stud tip. As the captive threaded bolt at the opposite end of the tool is tightened, the jaws that capture the joint compress, popping the interference-fit joint out of its home.

The tip of the adjuster bolt features a ball bearing to prevent the stud from digging into the tool’s drive end as the bolt is rotated. The pivot point features two pivot positions (pop the pivot pin out, adjust for a tighter or wider jaw distance and reinsert the pin into the appropriate pivot hole).

The tool is adjustable to accommodate up to a two-inch spread for different size ball joints. This handy style joint separator can be used on various styles of ball joints as well as certain styles of outer tie rod ends.

Using compressive force as opposed to impact force allows a controlled separation, reducing the chance of damaging adjacent surfaces.

We are ball joint separator manufacturer in China, welcome to consult us.

Maybe you need a car creeper…

Working on your vehicle can be a wonderful thing, there's a level of pride that happens and a level of accomplishment. However, getting on your knees, scooting from place to place to get around when underneath your vehicle, and overall just going down and getting back up again… can be a big PAIN (literally). You maybe need car seat or car creeper.

On top of all that, you are drastically slowed down in the job you’re doing. To fix this problem, there’s one single solution that is bound to make a big difference, and it’s a car creeper. A creeper is simple, a padded tray with wheels that allows you to move around as if you were “hovering” above the ground. There’s even some car creepers that allow you to fold them into chairs, so you can either law down or sit down.

We are high quality car creeper manufacturer in China, if you need, please contact us!