Some general tools

There are many things happening every day. Happy or sad. Luck or unluck. Good or bad. Whatever things are happening, we all need go long.

If we meet the happy thing, we can relax. While we meet the worried things, what should we do? Crying? Worrying? Of course not, we should face them bravely. An old saying is that the thing can be solved is not a thing. Deal with things, we not only need a strong heart, but also need some general tools. For example, hammers and screwdrivers for architecture; scredrivers and pliers for gardon; wrenches for daily life.

Our company have manufactured those tools for many years. We have leading work team and advanced technology. So we can promise that our products are in high quality. If you want some, not waiting, please consult us at your any time.

Correct Tire Inflation

Correct Tire Inflation is critical for the following reasons:

1. Fuel savings: It has been reported that for every 10% of under-inflation on each tire on a vehicle, a 1% reduction in fuel economy will occur. In the United States alone, the Department of Transportation estimates that under inflated tires waste 2 billion US gallons (7,600,000 m3) of fuel each year.

2. Extended tire life: Under inflated tires are the #1 cause of tire failure and contribute to tire disintegration, heat buildup, ply separation and sidewall/casing breakdowns. A difference of 10 lbs. in pressure on a set of truck duals literally drags the lower pressured tire 13 feet per mile resulting in reduced tread life. Under inflation can significantly reduce the number of casings that can re-treaded. Over inflation wears excessively in the center of the tread

3. Safety: Under-inflated tires lead to tread separation and tire failure, resulting in 40,000 accidents, 33,000 injuries and over 650 deaths per year. Properly inflated add greater stability, handling and braking efficiencies. Not all tire failures are caused by under-inflation. Structural damages caused, for example, by hitting sharp curbs or potholes, can also lead to sudden tire failures, even a certain time after the damaging incident.

4. Environmental Efficiency: Under-inflated tires, as estimated by the Department of Transportation, release over 57.5 billion pounds of unnecessary carbon-monoxide pollutants into the atmosphere each year in the United States alone.

Cold temperatures affect the air pressure in your tires. There is a loss of one pound for each ten degrees of temperature drop.

If your tires were destroyed, then you need tire repair tools or tire changer tools to repair them. Auto Tools Depot may be your suitable choice. After it has many experice on manufacture tools.

The caution about installing a spare tire

Before installing the spare tire changer tools, the first to make a simple check and remove the spare tire placed in the bottom of the vehicle to avoid accidents.

Tighten all screws after the tire fixed on the jack and then removed. According to the order of the diagonal twist, do not turn clockwise or counterclockwise and tighten when screwing Summary: When replacing car tires repair tools, the most important is the order of the sequence of operations and tighten the screws, remember to order according to the diagonal loose screws. Also, be sure to pay attention to the times in every vehicle maintenance is necessary to check the spare tire spare tire tread condition and tire pressure.

How can we do before changing the tires?

Before changing tires, first you should pack car in relatively safe and flat place. Then apply the parking brake, the parking gear into gear and turn the ignition switch to the lock position. Open the double flash warning signs and placed in a triangle from the car far enough.

Second is to check the tire changer tools and the spare tire and jack. generally, according to the different models, the spare tire usually placed: the bottom of the trunk floor, hanging below the rear fixed to the trunk door. SUV, spare tire hanging on the rear mostly fixed in the trunk or under the door, and the vehicle involved in the text spare tire is placed under the trunk floor.

Ready for preparation as described above, on the left is changing the tires.

Some auto tools are made by Auto Tools Depot

Gear Pullers can take the top of the device easily and can take out gear from recessed cavity with on damaging. They include a number of films fixed metal sheet, top pickup device and the buckle. Securing the metal plate embedded in the gear cavity, a retaining ring embedded in the cavities between the gear and the metal sheet, a top pickup device acrosome acrosome securing the metal plate is placed cavity in the fixed metal piece external button again set a buckle so that the metal sheet can be firmly fixed gear and surrounded acrosome, take the stud on the device by rotating the top stud to a downward pressure on the gear shaft, the entire device is subjected to an upward reaction force upward from the top, you can easily remove the gears.

Ok, during you take out gear, you mabye need lubrication tools, such as grease hose. Our company provides high auto tools for many years, if you like, please contact us.

Customer from India visit our company

Yesterday, a customer from India come to our company for a two-day visit. Manager Zhao took him to visit our company, he said our company atmosphere is very well and admired our leading team. He praised our products such auto tools, engine tools, etc are high quality.

Today, Manager Lu brougt the customer to visit our factory and introduced the machining process of our product. Finally, the Indian customer said he look forward to our cooperation.